Two SM columns, 12″ (300 mm) of powered travel, run from the iSMPS control box. The two-column layout is the right choice when the load sits centrally and the span is modest – packing stations, inspection benches, single-operator assembly cells. Each 5.9″ x 2.76″ (150 x 70 mm) anodized aluminum column carries 8 mm Ergoswiss T-slots on three faces, so shelves, crossbars and tool rails mount anywhere along the length rather than at fixed points.
Two SM columns, 12″ (300 mm) of powered travel, run from the iSMPS control box. The two-column layout is the right choice when the load sits centrally and the span is modest – packing stations, inspection benches, single-operator assembly cells. Each 5.9″ x 2.76″ (150 x 70 mm) anodized aluminum column carries 8 mm Ergoswiss T-slots on three faces, so shelves, crossbars and tool rails mount anywhere along the length rather than at fixed points.
Need 15.75″ (400 mm) of travel instead? See SM 2340 US 02. Building a wider bench, or one that carries load across its full span? The four-column SM 4330 US 02 doubles the support points.
An SM 2330 US 02 Quick-ship set consists of:
2x Lifting column SM 1330 with 70” connection cable / 1x Control box iSMPS with a 10 ft Power cable US / 1x Cable remote control Memory
Technical data
Performance data lifting column SM 1330 Number of lifting columns: 2 Max load: 1,320 lbs (600 kg) – includes weight of frame for a 2-leg setup. Max pushing force: 660 lbs / 300 kg per column Max. pulling force Static: 110 lbs / 500 N / dynamic – 22 lbs / 50 N Lifting speed: 0.35” / sec (9 mm / sec) Stroke: 11.81″ (300 mm) Base / retracted height: 20.9” (530 mm) Extended height: 32.7” (830 mm) Duty cycle E/D (On/Off) : 2 / 40 min
